Universal sample holders for SPM.


Add to Cart

Clear selection


Substrate Size 24 x 19.3 x 0.5 mm
Option Spring made from steel, Gr. 2, Dia. 0.3 mm (SU015)

[gap size=”20px”]

Sample preparation procedure:
  1. Take a clean substrate. Cut a strip double-sided adhesive tape slightly larger than the sample.
  2. Stick the adhesive to the substrate. Smooth its surface out with the back of tweezers to remove air bubbles.
  3. Put the sample on the adhesive tape and carefully press it with tweezers in several places (not touching the area intended for investigation).

Note: After the sample is fixed on the substrate, a noticeable vertical drift of the sample can occur within on hour (due to slow relaxation of adhesive tape). This drift shoudl be taken into account. If a minimal drift is required due to the nature of the investigation, prepare the sample beforehand (at least an hour before investigating).

Additional Information

Details Price QTY
Substrate Type: Polycrystalline Sapphire Substrate Set of 10 (SU001)
Substrate Type: Universal Sample Holder with Electric Contact (SU015)